Planck Standard
Physics

Engineers Find a Hidden Magnetic Effect in Ordinary Glass Fiber, Missed Since the 1970s

A magnet placed beside a multimode optical fiber, not along it, changes the light inside. The effect was hidden by a standard simplification used for more than 50 years.

Engineers Find a Hidden Magnetic Effect in Ordinary Glass Fiber, Missed Since the 1970s
Image via Phys.org

For more than 50 years, engineers have described light in optical fiber with a convenient shortcut that works so well it is rarely questioned. Researchers at the University of the Witwatersrand in Johannesburg, South Africa, have now shown that the shortcut hides a small but real effect: a magnet placed beside a multimode fiber, rather than along it, can change the light traveling inside.

Optical fibers are best known for carrying internet traffic, but these hair-thin strands of glass can also work as sensors. Engineers have long used them to measure magnetic fields, including those produced by the current in power lines and substations. Those sensors rely on the Faraday effect, first seen by Michael Faraday in a block of glass in 1845. When a magnetic field points along the fiber, it slightly twists the polarization of the light, which is the direction in which the light wave oscillates. Measuring the twist reveals the field strength and so the current that produced it.

A field pointing across the fiber was not expected to produce a Faraday effect. Master's student Mohammed Raiyan Sharif and Prof. Mitchell Cox have now demonstrated what they call a transverse, or sideways, Faraday effect in multimode fiber. Their work, done at the Wits Optical Communication Lab, is published in the journal Optics Letters.

A multimode fiber has a glass core wide enough to carry light along many paths at once, with the edge of the core acting like a mirror. At the far end, the overlapping waves form a random-looking pattern of bright and dark spots called speckle. The researchers watched that pattern with a camera while moving strong magnets near a stationary fiber without touching it. The pattern changed.

The explanation came from going back to first principles. In a fiber, the light's electric field oscillates almost entirely across the fiber, but a tiny part oscillates along it. The standard description, called the weak-guidance approximation, ignores that along-the-fiber part. The shortcut is excellent when the core and the surrounding glass have very similar refractive indices. In the step-index fibers the team tested, the index changes sharply at the edge of the core, and the ignored component becomes significant there. Keeping it in the equations showed that a sideways magnetic field moves some of the light's across-the-fiber oscillation into the along-the-fiber component, which changes how the light reflects off the edge of the core.

"It wasn't hard to 3D print a rig to test our intuition. Working out the theory for what we were seeing was the challenging part," Sharif said. "The key was to return to the underlying equations and question assumptions that are usually taken for granted in fiber optics."

The team separated the new effect from the better-known Cotton-Mouton effect, which also appears under a sideways field but grows with the square of the field strength, while the transverse Faraday effect grows in direct proportion. They confirmed four predictions of the theory: the effect vanishes without a strong index step, grows for light launched at steeper angles, appears for only one polarization relative to the field, and varies with wavelength like the ordinary Faraday effect. With a 0.24 tesla field, roughly what sits close to a strong neodymium magnet, the output pattern was only about 84% similar to the original.

Cox said the finding shows how much can hide in familiar technology. A sideways sensor could in principle sit beside a power cable instead of wrapping around it, though the fields near most cables are far weaker than those used in the experiment, and how sensitive a practical device could be remains to be shown. Cox also sees a possible use in optical computing, if the effect can one day be driven electrically by a coil instead of permanent magnets.

Read next